Spinner 600-1600mL, Cell Culture, Magnetic Drive, Side Arms
Bioreactors
BS1000TPSS
This magnetically agitated spinner vessel features a stainless steel head plate and a pitched blade impeller. It is perfectly suited for cell culture applications.
Total Volume: 600-2900smL
Working Volume: 600-1600mL
Drive: Magnetic (2-250rpm or 60-500rpm)
Impeller: Pitched blade
Sensor Size: 220mm
Side Arms: 2 x GL45
Bioblock: Not suitable
Technical Specifications
Total Volume: 600-2900smL
Working Volume: 600-1600mL
Drive: Magnetic (2-250rpm or 60-500rpm)
Impeller: Pitched blade
Sensor Size: 220mm
Side Arms: 2 x GL45
Bioblock: Not suitable
Port Configuration
- Pg13.5 #1: Impeller shaft (CF6mm) w/ pitched blade impeller OD50mm
- Pg13.5 #2: pH Sensor
- Pg13.5 #3: pO2 sensor
- Pg13.5 #4: Media in (triple port)
- Pg13.5 #5: Gas in w/ sparger (CF4mm)
- Pg13.5 #6: Sample pipe (CF4mm)
- Pg13.5 #7: Septum holder w/ septum
- Pg13.5 #8: Septum holder w/ septum
- D6 #1: Thermowell
- D6 #2: Exhaust gas
Part Number
Part Description
- 78903161 DASGIP spinner type BS 1000mL, 100mm neck, 2xGL45 ports, flask-only
- 77101001 GPI100 headplate w/ 8xPg13.5 and 2xD6, complete w/ O-Ring and Screw cap
- 78532283 DASGIP compression fitting ID6mm with PG13.5 male thread, all parts included
- 78107103 Impeller shaft for spinner type TP, stainless, OD6mm, L236mm
- 78107206 Impeller assembly V2, for 3 blade impeller, designed for magnet OD13, PTFE
- 78100537 Magnetic stir bar D13x50mm, Neodym round cross section
- 78706437 O-Ring 10x3 (IDxd), Si820/VMQ70
- 78107186 Slide Ring ID7mm, OD10mm, B3mm Material: Zedex 530
- 78100576 3 blade impeller, 30° pitch, OD50mm, ID10mm, stainless steel
- 78706129 Set screw M4x4, DIN913, stainless steel for Hex wrench size 2mm
- 78532282 DASGIP compression fitting ID4mm with PG13.5 male thread, all parts included
- 78107102 Stainless steel pipe OD4mm/ID2mm, L270mm, with barb
- 78200119 Tubing clamp (Mohr), L50mm, nickel plated brass
- 78532034 Filter assembly, type Gas In
- 78532037 Filter capsule assembly, type Gas Out
- 78706414 DASGIP triple port w/ 3x OD4mm tubing, w/Pg13.5 male thread, all parts included
- 78532036 Liquid feed connector assembly
- 78510145 DASGIP sampling accessory w/ swabable valve for vessels type BS/DS/SR/DR
- 77102006 Septumholder Pg13.5 male with septum, ID12mm, stainless steel
- 77102028 M6 thermowell, L250mm, ID2mm, stainless, Li213mm, complete
- 77102021 M6 port assembly, L67mm, ID2mm,stainless steel, for DASGIP headplate, complete
- 78106121 GL45 screw cap, PBT, closed, green, incl. PTFE coated silicone washer
- 78704133 Hex wrench w/ ball shaped head, size 2mm